Opening hours: Mon – Fr: 8.00-16.00

Protective sheet on straw

Protective sheet on straw

Sheet should be installed according to instruction presented in the picture to fulfil its function, i.e. protect straw bales from unfavourable atmospheric conditions: rain, wind, sun, snow.

1.Staw bales should be lied in such way that angle of 45 degrees should be created after covering them with sheet.

2.Stheet should be spread so that seam should be located at the top, on the outside.

3.It is not allowed to install sheet in such way that flat surface will be created at the top, in which rain water or snow water could gather.

4.Sheet should be strongly stretched, so that water can flow down freely from it.

5.Sheet should be fastened using clips or fastening straps to make its moving and hovering impossible

Geocover LLC is not responsible for inappropriate installation of sheet. i.e. differently than in the way described above and is not responsible for eventual damages that can be caused in connection with it. Simultaneously we inform that in the case of activity of intensive and abnormal weather phenomena, purchaser should apply further safety measures in order not to expose straw to be damaged.

Grammage

In our offer You will find sheet for straw with grammage of 110 g/m2, 140 g/m2 or 150 g/m2. Sheet for straw is ideally useful for protection of straw. For convenience of our customers we prepared sheet for straw in various sizes.

Protective sheet for straw with grammage of 110 g/m2 is effective solution that allows to protect straw bales from unfavourable atmospheric conditions. Thanks to breathing properties it minimizes the risk of appearing mould. Its appropriate fastening: at angle of 45 degrees is essential, so that it fulfils its functions properly. At correct position the excess of rainfall water flows down freely on sheet. Covered straw is protected from rain, snow, frost and wind. Protective sheet is durable and resistant against tearing off. UV stabiliser ensures long longevity of product.

COVER – Protective sheet on straw with grammage of 140 g/m2 is effective solution that allows to protect straw bales from unfavourable atmospheric conditions. Thanks to breathing properties it minimizes the risk of appearing mould. Appropriate fastening cover: at angel of 45 degrees is essential, so that it fulfils its functions properly. In the case of correct position the excess of rainfall water flows down freely on cover. Covered straw is protected from rain, snow, frost and wind. The cover is durable and resistant against tearing off. UV stabiliser ensures long longevity of product.

Protective sheet on straw with grammage of 150 g/m2 is effective solution that allows to protect straw bales from unfavourable atmospheric conditions. Thanks to breathing properties it minimizes the risk of appearing mould. Its proper fastening: at angle of 45 degrees is important, so that it can fulfil its functions appropriately. At right position the excess of rainfall water flows down freely on sheet. Covered straw is protected from rain, snow, frost and wind. Protective sheet is durable and resistant against tearing off. UV stabiliser ensures long longevity of product.

en_GBEnglish